operated,function,release,contact,monitoring,contacts,monitored,version,positive

Home | Contact us | Legal notice

mGard key interlocks What is mGard Machine guarding applications Switch gear applications Product range Key & lock specifications Product presentation FAQ Product Builder

amGard safety switches What is amGard Application examples Product range Common assemblies Product presentation FAQ Key & lock specifications Product Builder

eGard access & control What is eGard Application examples Product range Common assemblies Product presentation FAQ Technical specifications

E-Stop with Ronis Operated Reset

Monitoring

No monitoring

2 force break positive make NC Safety contacts (uses none of the I/O pins)
Monitored version (EK) also has 1NO monitoring contact and this uses 1 output pin
With Ronis key operated reset function
40mm button

Twist release after use of the reset key

Standards	EN 60947-1:2007 (Low-voltage switchgear and control gear), EN60975-5-1:2004, EN62061:2005, EN/ISO13849-1:2008, EN50178:1997, EN60204-1:2006, EN50295:1999, GS-ET-19:04/2004
Certifications	CE marked for all applicable directives
Category	Cat. 4, PLe (EN/ISO 13849-1) and SIL3 (EN/IEC 62061)
Functional safety data^*	B10d	500.000
	MTTfd	High > 385 years (590 years)
	CCF
	DC	High 99% (with correct monitoring of both channels and including the opposite-mode monitoring switch)
	PFHd [1/h]	5,90E-10

* eGard modules need to be constructed as a complete assembly to reach stated values

« Back